Double End Tenoner
A-Type 6 / 8 Spindle Configuration

6

SPINDLE

Double End Tenoner

A-Type 6 Spindle Configuration

雙端作榫機Double End Tenoner A Type 6
Digital Width Controller (CH-525)

Digital Width Controller
(CH-525)

Auto. positioning of movable side of machine via a digital width controller (CH-525) for auto. working width setting.
Features measurement selection in mm/inches.

Top Pressure Beams + Gearbox

Top Pressure Beams + Gearbox

Heavy top pressure beams with spring loaded rollers on which V-belts run; driven via gearbox off feed drive shaft driving bottom feed chaintracks.

Moulding System

Moulding System

Capable of swiveling to angles of up to ±90°.
Powered by high frequency motor.

Feed Chaintrack

Feed Chaintrack

Non marking, anti skid rubber surfaced bottom feed chaintracks composed of precision chains, linked by hardened and ground pins in sealed permanently lubricated needle bearings with adjustable tensioner.

Infeed Reference Fence

Infeed Reference Fence

Infeed reference fence on fixed side of machine with removable "L-shaped" guide for workpieces with top/bottom overhangs.

Heavy Duty Machine Base + Precision Linear Guideways + Lead Screw +AC Motor

Heavy Duty Machine Base + Precision Linear Guideways + Lead Screw +AC Motor

Heavy duty machine base by welded stress relieved steel.
Movable side of machine runs on precision linear guideways, driven by lead screw and AC motor (with encoder).

Sizing System

Sizing System

Scoring and main saw construction may effectively avoid tearing problems when cutting laminated panels. The sawblades are closely positioned to facilitate adjustment.

8

SPINDLE

Double End Tenoner

A-Type 8 Spindle Configuration

雙端作榫機Double End Tenoner A Type 8
Digital Width Controller (CH-525)

Digital Width Controller
(CH-525)

Auto. positioning of movable side of machine via a digital width controller (CH-525) for auto. working width setting.
Features measurement selection in mm/inches.

Top Pressure Beams + Gearbox

Top Pressure Beams + Gearbox

Heavy top pressure beams with spring loaded rollers on which V-belts run; driven via gearbox off feed drive shaft driving bottom feed chaintracks.

First Moulding System

First Moulding System

Equipped with cutter jumping function.
Optional capability of swiveling to angles of up to 0° ~ 90°.
Powered by high frequency motors.

Feed Chaintrack

Feed Chaintrack

Non marking, anti skid rubber surfaced bottom feed chaintracks composed of precision chains, linked by hardened and ground pins in sealed permanently lubricated needle bearings with adjustable tensioner.

Infeed Reference Fence

Infeed Reference Fence

Infeed reference fence on fixed side of machine with removable "L-shaped" guide for workpieces with top/bottom overhangs.

Second Moulding System

Second Moulding System

Capable of swiveling to angles of up to ±90°.
Powered by high frequency motors.

Heavy Duty Machine Base + Precision Linear Guideways + Lead Screw +AC Motor

Heavy Duty Machine Base + Precision Linear Guideways + Lead Screw +AC Motor

Heavy duty machine base by welded stress relieved steel.
Movable side of machine runs on precision linear guideways, driven by lead screw and AC motor (with encoder).

Sizing System

Sizing System

Scoring and main saw construction may effectively avoid tearing problems when cutting laminated panels. The sawblades are closely positioned to facilitate adjustment.

Taiwan Branch :

Phone: +886-4-2562-0988

Fax: +886-4-2561-9826

Address: No. 276-2, Kuan Chi Road, Shen Kang District, Taichung 42948, Taiwan

E-CHAIN MACHINERY CO., LTD.